So we start with a '72 VW Bug baja with a 2.3 liter ford motor in it and a custom formed 11ga steel pan. The plan is to strip off the body and replace it with the '56 oval you see in the back of the truck. The end result is planned for 2x4 front arms on an 8" wider beam, 5x5 Rear arms, full cage, bus tranny, and a gallon of bondo and lots of beer.
Time will tell if I ever actually get to it.
So the plan has changed. I am going with a full tubular chassis and cage and put a trimmed down body on that. I will be trimming the body up quite a bit then sending it off to be media blasted.
For problems or questions regarding this web contact